It is categorized as a Class D Monoblock Subwoofer Amplifier. The Epicenter 600 delivers high current, stable down to 1 Ohm. The Epicenter 600 has a removable top cover that allows access to controls. The high-power subwoofer amplifier delivers extreme performance. It features The Epicenter Bass Restoration. The Epicenter Bass Restoration features Sweep and Width controls that help recover bass frequencies that may be lost during performance. The Sweep and Width controls are easily concealed once adjustments are made. It also includes the MILCTM clip detection circuit. With the MILCTM clip detection circuit the amplifier is looking to detect any clipping. Red and Green LED indicators let the user know if any clipping occurs. Standard come the Speaker level inputs with GTOTM Signal Sensing. A PFM Subsonic Filter is built into the amplifier. 24 dB / Octave Linkwitz-Riley Selectable Crossover It has a Dash Mount ACR-3 level control included. The Dash Mount ACR-3 level control allows the user to adjust subwoofer and bass levels. The control also features LED indicators. The Epicenter 600 also allows for System Expansion. The included expansion bus allow for daisy-chaining multiple amplifiers. Controls that are included are Output Polarity, PFM Subsonic Filter and Crossover plus many more.
The Epicenter 600 Owner's Manual| Specifications | |
|---|---|
| Frequency Response: | 16 Hz – 250 Hz |
| Output Polarity Switch: | Yes |
| PFM Subsonic Filter: | 18dB/Octave, Selectable 16 Hz or 32 Hz |
| Weight: | 4.5lbs (2.0kg) |
| Bass Processing: | The Epicenter |
| Preamp Inputs: | 1 Main, 1 Expansion Bus |
| Signal to Noise: | 104 dBa, Ref 600 W @ 1 Ohm |
| Low-Pass Filter: | 24dB/Octave Linkwitz-Riley, Adjustable From 30 Hz – 250 Hz |
| Dimensions: | 9W x 7.95D x 2.1H |
| Input Voltage Range: | 200 mV – 6 V RMS |
| Expansion Bus Output: | Buffered, post-processing |
| Damping Factor: | 670 at 10 V, 4 Ohm Output, 100 Hz |
| THD+N: | < 0.1% |
| Minimum Power / Ground Wire Gauge: | 3 AWG wire |
| Fuse Rating: | 2 x 40 A |
It is categorized as a Class D Monoblock Subwoofer Amplifier. The Epicenter 600 delivers high current, stable down to 1 Ohm. The Epicenter 600 has a removable top cover that allows access to controls. The high-power subwoofer amplifier delivers extreme performance. It features The Epicenter Bass Restoration. The Epicenter Bass Restoration features Sweep and Width controls that help recover bass frequencies that may be lost during performance. The Sweep and Width controls are easily concealed once adjustments are made. It also includes the MILCTM clip detection circuit. With the MILCTM clip detection circuit the amplifier is looking to detect any clipping. Red and Green LED indicators let the user know if any clipping occurs. Standard come the Speaker level inputs with GTOTM Signal Sensing. A PFM Subsonic Filter is built into the amplifier. 24 dB / Octave Linkwitz-Riley Selectable Crossover It has a Dash Mount ACR-3 level control included. The Dash Mount ACR-3 level control allows the user to adjust subwoofer and bass levels. The control also features LED indicators. The Epicenter 600 also allows for System Expansion. The included expansion bus allow for daisy-chaining multiple amplifiers. Controls that are included are Output Polarity, PFM Subsonic Filter and Crossover plus many more.
The Epicenter 600 Owner's Manual
