Onlinecarstereo Exclusive Bundle
This exclusive package is brought to you by Onlinecarstereo. We have put together this bundle to kickstart your vehicle to the path of excellent car audio.
Universal Full Car Audio Package includes the following: Jensen MPR2110 + Jensen JS65T + Jensen JS69T + Autotek AYA-1100.4
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- •Jensen MPR2110
- • Jensen JS65T
- • Jensen JS69T
- •Autotek AYA-1100.4
- •Owner's Manual
Jensen MPR2110 1-DIN Digital Media Receiver with Bluetooth remote control included
Bluetooth® on board
Need a straight-forward digital media receiver for your daily driver or work truck? Jensen's MPR2110 digital media receiver may be just the ticket. Nothing fancy here, just a solid piece of gear that will get the job done. And it sounds good while doing it, thanks to a robust built-in amplifier.
Pair your phone and you can make hands-free calls, while a built-in microphone makes installation easier. Audio streaming lets you tap into your favorite music streams and podcasts. And if you've got some favorite tunes, you can load MP3 files onto a USB drive for when you're out of range of a cell tower. Four preset EQ curves make adjusting the sound a snap. Jensen protects this receiver with a 2-year warranty.
Jensen JS65T JS Series 6.5" 50W RMS 4Ohm 3-Way Triax Speakers
New sound with throwback looks
Kick crackly factory sound to the curb and step up to these Jensen JS65T 6-1/2" 3-way car speakers. Inspired by the legendary Jensen triaxial speakers of yesteryear, these new entries combine vintage looks with solid, full-range sound. They match up well to an aftermarket stereo or amp and deliver detail that schools your old, stock speakers. The speaker's polypropylene cone, PEI midrange, and tweeter serve up sweet sound but are tough enough for life in your car doors.
Jensen JS69T JS Series 6x9” 75W RMS 4Ohm 3-Way Triax Speakers
New sound with throwback looks
Kick crackly factory sound to the curb and step up to these Jensen JS69T 6"x9" 3-way car speakers. Inspired by the legendary Jensen triaxial speakers of yesteryear, these new entries combine vintage looks with solid, full-range sound. They match up well to an aftermarket stereo or amp and deliver detail that schools your old, stock speakers. The speaker's polypropylene cone, PEI midrange, and tweeter serve up sweet sound but are tough enough for life in your car doors..
Autotek AYA-1100.4 Alloy Series 40W x 4 RMS @2Ohms, 1100W Max Power Class A/B 4-Channel Car Audio Amplifier
LOW NOISE PREAMPLIFIER CIRCUIT -
Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process.
Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path.
Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power.
Jensen MPR2110 1-DIN Digital Media Receiver with Bluetooth remote control included
Features:
- digital media receiver (does not play CDs)
- Bluetooth hands-free calling and audio streaming
- plays MP3 music files
- 7-character high-definition LCD display
- remote control included
- 4 preset EQ curves
Expandability:
- inputs: front USB and aux (minijack) inputs
- outputs: 4-channel preamp outputs (2-volt front, rear)
- Other Features and Specs:
- built-in amplifier (16 watts RMS/50 peak x 4 channels)
- built-in microphone
- warranty: 2 years
Specification:
- Bluetooth with hands-free calling, music streaming (HFP, A2DP, AVRCP)
- Inputs:
- Front USB (1A)
- Front 3.5mm aux
- Outputs: 2 Pair of preamp outputs (front/rear)
- Power: 200 Watts (50 W x 4)
- Media playback: USB; will not play CDs
- File formats : MP3
- Audio: 4 EQ presets (Pop, Classic, Rock, & Flat)
- Tuner: AM/FM tuner with 30 stations presets (18FM/12AM)
- Display: 7-Character LCD
- 4 Preset EQ curves: Classic, Pop, Rock and Flat
Jensen JS65T JS Series 6.5" 50W RMS (250W Peak Power Handling) 4Ohm 3-Way Triax Speakers
Specificaions:
- 6.5” 3-Way Design
- Polypropylene Woofer Cones
- Nitrile Butadiene Rubber Surrounds
- 35mm PEI Midrange
- 15mm Piezo Tweeter
- Sensitivity: 87dB
- Frequency Response: 70Hz-20kHz
- Nominal Impedance: 4 Ohm
- RMS Power: 50 Watts
- Peak Power: 250 Watts
Jensen JS69T JS Series 6x9” 75W RMS (375W Peak Power Handling) 4Ohm 3-Way Triax Speakers
Specificaions:
- 6x9” 3-Way Design
- Polypropylene Woofer Cones
- Nitrile Butadiene Rubber Surrounds
- 58mm Mylar Dome Midrange
- 20mm Piezo Tweeter
- Sensitivity: 89dB
- Frequency Response: 70Hz-20kHz
- Nominal Impedance: 4 Ohm
- RMS Power: 75 Watts
- Peak Power: 375 Watts
Autotek AYA-1100.4 Alloy Series 40W x 4 RMS @2Ohms, 1100W Max Power Class A/B 4-Channel Car Audio Amplifier
Features:
- LOW NOISE PREAMPLIFIER CIRCUIT - Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process.
- RCA INPUTS - Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path.
- HIGH LEVEL INPUTS - Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power.
- OPERATION MODE - Mono Only
- CROSSOVER TYPE - Variable Electronic 12dB Per Octave
- ELECTRONIC EQUALIZER - Fully Adjustable 12dB Crossovers
- CLASS/TOPOLOGY - Class A/B: High sound quality circuit that allows Alloy to develop high levels of power with minimal distortion.
- OUTPUT DEVICE TECHNOLOGY- PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels.
- HEAT SINK - QTD Technology Aluminum: Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening.
- POWER SUPPLY - High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system.
- OUTPUT CONNECTIONS - Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion.
- CONNECTION TYPE - Screw Down Connectors: Easy access for hand tool allowing a quick and secure connection.
- LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS - Monitor overload and speaker short protection with lighted indicators on the amplifier end panel.
Specifications:
- Class: Class A/B
- Total Channels: 4
- Power @ 1 Ohm (Ch X Watts): N/A
- Power @ 2 Ohms (Ch X Watts): 4 X 40
- Power @ 4 Ohms (Ch X Watts): 4 X 30
- Mono Bridged @ 4 Ohms (Ch X Watts): 2 x 60
- Crossover: Variable Electronic 12db Per Octave
- Tone Control/parametric Eq: Built-in Bass Control
- Bass Boost: Switchable: 0 / +6 / +12db
- Variable Voltage: .2 To 9v
- Frequency Response: 10hz-22khz
- Speaker Level Audio Inputs: Yes
- Power Terminal 12v/gnd: 4 Awg
- Speaker Terminal Wire Gauge: 12 Awg
- Fusing: 30A
- UPC: 798418838185
- Weight: 26
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.