Infinity Kappa 463XF Kappa Series 4"x6” 60W RMS (180W Peak Power Handling) 2-Way Car Speakers
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- •(2) 4"x6" 2-way Car Speakers
- •(2) Adhesive backed foam gaskets
- •(2) Adhesive backed Infinity logo badges
- •(8) 1" Screws
- •(8) Speed clips
- •Template on box
- •Installation instructions
40kHz High-resolution Silk Dome Tweeter
Kappa edge-driven silk dome tweeters equipped with oversized voice coils deliver silky smooth highs with impressive thermal power handling and 40kHz high resolution.
Patented Plus One™ Glass Fiber Woofers
Infinity’s glassfiber woofer cones are lighter and stiffer with more cone-area than the competition, delivering increased low-frequency output and higher efficiency. Hearing is believing.
0dB or -3dB Tweeter Output Level Control
The push-button on the angled tweeter allows tweeter output level control of 0dB or -3dB to optimize system linearity based on installation location.
UniPivot and Angled Tweeter
For 5-1/4”, 6-1/2” and 6”x 8” coaxial models, the tweeters are angled and can be rotated 270° after installation on most models. This gives you imaging options and the ability to elevate the soundstage on low mounted speakers.
3-way Upgradability
Kappa 2-way component system crossovers are compact and equipped with 2-way and 3-way selections to accommodate a 2” or 3” midrange upgrade. The optional 2” or 3” midrange includes a bandpass crossover to upgrade a two-way system into a three-way system with perfect tonal balance.
Super Compact Design and High Sensitivity 3” Midrange Speaker
Kappa 3” midrange delivers low-frequency response to 300Hz while keeping high sensitivity over 89dB.The super compact design and premium performance allows the midrange to fit more vehicles without sacrificing any of your audio experience.
Sleek and Powerful Industry Design
The essence of form and function, Kappa tweeters are elegantly designed deliver a car audio experience as powerful as it is beautiful.
Slim and Smart Crossover Design
Kappa component systems all have very slim crossovers, which equipped with connection cable for easy installation. The push-button on crossover allows tweeter output level control of 0dB or -3dB to optimize system linearity based on installation location.
- Diameter : 4x6 Inch
- Sensitivity : 93 dB
- Impedance : 3 Ohm
- Frequency Response : 75-40000 Hz
- Peak Power Handling : 180 Watts
- Design : 2 Way
- Shallow Mount : 4x6 Inch
- RMS Power Handling : 60 Watts
Features:
- Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.
- High-Output Design: The high output 3? voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4? speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 3? load.
- Edge Driven Dome Tweeters: Each speaker has an edge-driven silk dome tweeter. Edge-driven tweeters have better dispersion characteristics and allow for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity. The tweeter also has an output level switch; choose +0 dB (flat) or -3 dB.
Specifications:
- Speaker Size: 4X6
- Design: 2-way
- Tweeter Design: Edge-Driven Dome
- Impedance (Ohms): 3
- Tweeter Composition: Silk
- Woofer Composition: Glass Fiber
- Woofer Surround: Rubber
- Parts Warranty: 3 Years
- Labor Warranty: 3 Years
- Sensitivity (1W at 1 meter): N/A
- Sensitivity at 2.83 volts: 93
- Frequency Response: 75 - 40k Hz
- Minimum RMS Wattage: ---
- Maximum RMS Wattage: 60
- Peak Power Handling (Watts): 180
- Top-mount Depth (Inches): 13/16
- Bottom-mount Depth (Inches): 2 1/8
- Cutout Diameter or Length (inches): 0
- Mounting Height (Inches): 0.37
- UPC: 050667376963
- Weight: 8
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
i was looking for a 4x6 speaker when i saw this this at the website with less price i immediately grab it knowing that it is from infinity so it is really worth the price. glad I went with it!
-
I had to replace the 4x6s on my Silverado so I decided to get the 463XF as replacement. Excellent speakers! Crystal clear sound, especially the highs from the tweeters. Haven’t heard any distortion too when I tried to up the volume. I also like the plate’s design. Its kind of unique.
